Hi, since version TMS 14.6 or so, the date is not shown in the confirmation email. The TAG <VAL:MEETING_DATE_TIME> used to tell us the Start date and time + length of the meeting.Now in TMS 14.6 it will only show start time + lenght, not the dat...
We have problem with a TMS server: the TMSLiveService and the IIS will on a daily basis lock up the server and utilize 100% of the CPU, making the TMS server fail in setting upp booked conferences.When this happens, we just restart the TMSLiveService...
You need the MultiSite option key for your unit. It is a software option that might be able to purchase from Cisco if they have not stopped selling such for MXP880. You can see which installed options you have on your system under the system informat...
There are basicly 2 things you need the dual nic option for:1. When you want to seperate a inside network and a outside network on seperate interfaces..2. IF you want to place the public interface on a NATed network behind a firewall. The NAT option ...
For this part of your design you do not need the Dual NIC option. The VCS-C and VCS-E will use a firewall traversal protocol to connect.The customers should set the peer address to the NAT address that is configured in the firewall pointing to your ...
Hello,In your design it is allowed to do NAT between VCS-C and VCS-E if you set them up using traversal links/zone, which I guess is what you plan to do. A neighbour zone will fail in this design.So your customer can have a VCS-C on their private net...