Looks like this went down during the weekend.
It was working last week.
From postman:
13:36:32.300
▶POST https://sandboxdnac.cisco.com/dna/system/api/v1/auth/token
Error: connect ETIMEDOUT 64.103.37.34:443
▶Request Headers
Auth...
Hi Chris.I see you already have provisioned the node for SOCKS Proxy. If you want to be able to still have IP connectivity (for ping or telnet) to the ENE's, then enable the SOCKS Proxy Only option. The SOCKS Proxy needs to be provisioned on the LA...
Marius,The TCC3's in the M12 would be necessary if the two shelves are going to be a multishelf and the M6 shelf is going to be the subtending shelf. That would be the only scenario that would require it from the information you provided in your pos...
Hi Gary,The "1950" number indicates the amount of dispersion compensation that the unit will achieve. The amount of dispersion compensation needed is dependent on the fiber length and type for that specific span. So, unless you have the same type o...
Hi,Yes, you can create a circuit on ports between those two cards. Just be sure to match the POS encapsulation. By default both are GFP so you should not run into any issues there.List of compatible SFP's for the CE-MR-6:http://www.cisco.com/en/US/...
The above post was for the difference of the 9.3 and 9.3 lite sw loads.Below is a link to what is new for 9.3:Release Notes:http://www.cisco.com/en/US/docs/optical/15000r9_3/release/notes/454d93_relnotes.html#wp74186Thanks,Will