Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Information
This code is looking at neighbour discovery, learns remote name and remote interface and push it in the
description of the local interface
Note: the length of the remote interface name can be tuned by set len_intn [value]
code 2024-...
Purpose =======This EEM script provide possibilities to clear the subscriber based on different filterThis script also answer the confirmation enforced in the latest IOS-XR released.
Steps to activate=================1 create a directory2 Upload the...
Version 1.1 Oct 1 2018
Purpose =======This script will capture information of the RPD, this is ran from a command line an alias can be used to call the full command
How to install ==============
A- Create a directory for scripts (if not done yet)r...
Issue :=====The following message is displayed when inserting more than 2 uBR-MC88V####3%IPCOIR-5-CARD_DETECTED: Card type DOCSIS Modem Card (Universal) 8 Down/8 Up (F-connector) with Integrated Up-converter (0x675) in slot 5/0 %UBR7200-3-ENVM_FAN_O...
Purpose Remove headings bytes in a sniffer, usefull for cleaning cable intercept tracesit also support the re-encap for wireshark in serial ...This tar contains a script and the additional README
Hi Volker
there needs to be a cdp event in the ios-xe to configure the interface
if you have one interface with cdp neighbor, shut on the remote and wait until cdp neighbor disappear locally
then unshut on the remote
Potentially, debug event manager ...
Hi Volker
to register the tcl script source does not really work
example
=======
net1(tcl)#source unix:description_cdp.tclinvalid command name "::cisco::eem::event_register_neighbor_discovery"::cisco::eem::event_register_neighbor_discovery interfac...
Hi Volker
I tested locally and it ran fine, I think the copy and paste into a file picked up some garbage
so what you need to do is choose your file editor
copy first :
::cisco::eem::event_register_neighbor_discovery interface Gig cdp add
namespace i...
Hi Volker
> > invalid command name "::cisco::eem::event_register_neighbor_discovery" ^> > % Invalid input detected at '^' marker.
> >How can I solve this?
This registry also exist in ios-xe, so I do not think the script should complain, looking at ...
Hi DanIn this case the "bundle" is there for the CMTS to learn the l3 forwarding, so both would need itinterface is definitely needed as you will need to forward DHCP, TFTP ...Wideband for L3 traffic unicast, multicastregardsAlain
