Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Can someone please tell few stuff so that i can get my head around the ACI end to end working architecture.1- Is there any concept of vlans in ACI or is that concept changed into vxlan? if not then what is infrastructure vlan which is used for com...
guys i am really new to wireless and need some basic setup help.....we have a office and we have recently purchased 4400 WLC and 1242AGlight weight access points.... now for AP to install (as our office is really big) what is the formula to calculate...
guys suppose we are having 10 or 20 routes on WAN router learned from EIGRPthe wan routers has 10.15.15.0/24 to 10.15.X.0/24 etc (learned from EIGRP) and if we want to advertise a router in BGP can we use 10.15.0.0/16 route rather then putting 20 rou...
i have made a big blunder.....i had a new version of IOS for 2500......i changed the router config reg in to 0x2101 and then in boot mood i put tyhe command erase flash......now there is no file in flash memory.....and i have new version of ios with ...
i m trying to copy IOS from router to tftp server.....i have connected router to my ethernet....but as soon as i try to copy it doesnt work...like it ask me all the things which file and destination but after checksum an error comes TFTP timeout....i...
Jon Now one last question buddy and i guess it takes me to square one........i hav ethose 10.4.1.0/24 to 200 (its mix) so all togather 70 routes on my WAN router.......we have dual home BGP connection with one AS though........no IBGP is running ...
Thanks JON 100 out of 100 (you deserve that) so am i doing the right thing putting 10.4.1.0/24 under BGP and doing aggregation with /16 r u happy with route-map???? does it make sence now???
JON so if /16 would be summarized still ppl can reach 70 networks that what i meant to ask......as i cant add 70 network commands in BGPwhat is the solution am i doing wrong or what???task is 70 routes with 10.4.X.X /24so i have add 10.4.1.0/24...
Jon you are right the main thing is which i cant get my head around is that i have around70 networks 10.4.1.0 to 10.4.200.0/24 its mix actually now i am advertising in bgprouter bgp 1neigbour X.X.X.C remote_as X route-map traffic_out outnetwork 10.4....
Thanks guys for your help now one more and final question.......actually there are two wan routers (the quetion is not abt the second one) i am advertising three networks in BGP 10.4.1.0/2410.5.1.0/2410.6.1.0/24the aggregation will be look like this...
