About cmarinos

cmarinos · 09-21-2005

- I'm trying to segment my internal network and have my internal servers ie mail, file etc. segmented from my inside/client network. All this is in place with everything open. I would like to know if there is a "master list" of default ports which ...

cmarinos · 01-26-2005

Hi Joe,If your looking to have redundancy you can always have a static route with different weight values at the end of the routeie.ip route 10.1.1.1 255.255.255.0 10.1.1.3ip route 10.1.1.1 255.255.255.0 10.1.1.2 200

cmarinos · 05-18-2002

Unfortunately shutting down a interface does not clear out previous interface configs, it's not the same thing. There are a few instances in which Cisco devices don't clear unless you reboot. VLANS on a Cat for instance is also another simular situ...

cmarinos · 10-19-2001

you might want to Trunk between the 2 cats and or setup HSRP

cmarinos · 08-20-2001

you have mutiple DLCI's I assume there mapped to multiple IP's?just add a extended access-list on each sub-interface

cmarinos · 08-20-2001

I've never heard of a splitter on a T1.But another T1 seems a little overload. You might want to order a ISDN line configure it with DDR and have it as your backup. Now you can HSRP between the T1 and ISDN line. This is a little cheaper alsoGood l...

Member Since	‎08-19-2001 06:51 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	8

User Statistics

User Activity

Windows/Unix through PIX

Re: Configuring crypto maps with different peer address for redu

Re: Frame Relay - Can't set sub-interface

Re: Setting up multihome with one ISP

Re: Traffic Shapping

Re: How to use HSRP w/out ordering another T1 for my WAN connect