Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I’m quite new to QoS and troubleshooting an output packet drop issue on a 3750x switch which seem to be due to QoS configuration.
I was following the instruction on this document for troubleshooting.
http://www.cisco.com/c/en/us/support/docs/...
Hi,
I would like to know what the expected behaviour of the supplicant if the switch port is not configured for dot1x.
I've seen that PCs ( with anyconnect or windows native client ) send around 3 EAPOL messages and ignore dot1x and continue with th...
Hi all,
I would like to get your expert opinion on anyconnect NAM vs windows native client
We are planning to deploy CISCO ISE with anyconnect NAM as the supplicant. Proposed method of authentication is EAP-FAST with both machine and user authenticat...
Hi Mark and Joseph,
Thanks both for the responses and they cleared some of the concerns I had.
As per the interface stats, the drops are noticed on the queue 2 ( if you count from 1 ).
In theory, this queue should be able to have 100 % of the bandwi...
Hi Jatin,
the interface configuration of the switch is irrelevant as the switch doesn't participate in dot1x.
However, it looks like this
int fa0/1
switchport mode access
switchport access vlan 10
spanning-tree portfast
I agree with your comment "...
Hi Neno and Marvin,
Thanks both for your informative responses. Really appreciate it.
Few reasons I am inclined towards the windows client are;• We don’t really need EAP-chaining in our environmentBecause we’ve got a Next Gen firewall with User-ID en...
