Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have ASA 5520 with three interfaces (outside, inside, dmz)
i already have VPN site to site and works fine.
we need to change IP address of outside interface from public ip to private ip
i changes ip on the interface and modified default route rule ...
I have PIX-506E security device that separate our HQ from branches, i want to upgrade main link to 120Mbps and i think this PIX will not be able to handle this traffic (it will be like a bottle neck).
so i have two options; either remove it or upgrad...
I have ASA 5520 with DMZ and LAN networks configured
DMZ security is 50
LAN security is 100
traffic from LAN to DMZ is permitted by default
i want to open file share from DMZ PC to LAN PC
i created access list to test the operation
access-list dmz_in...
I have 30 branches connected to HQ.
each branch has 4Mbps connection and HQ has 120Mbps.
the branches connected with HQ through IPsec tunnels.
which router will be suitable to me that can handle 120Mbps connection
Hi,
I configured VPN Client IPSec with sertificate (RSA) authentication on ASA 5520 8.3.
i requested certificates from MS CA by entering URL: http://serverIP/certsrv and request the certificate and install it on the client
the configuration worked f...
the access groups that i have for inbound connections (LAN_in, Out_in, DMZ_in).
i created only an access list without any NAT rule
i tested packet tracer and it was permitted (allowed).
Thanks for your comment.
according to the datasheet of these models:
ISR 4331 has a speed of 100Mbps and can be upgraded to 300Mbps
ISR 4351 has a speed of 200Mbps and can be upgraded to 400Mbps
but these numbers I think without running any function ...
