About ramesh.karki

ramesh.karki · 03-17-2010

Hi, How IOS forward bgp RIB route (inactive) that has another prefer (active) next-hop on ip routing table . Here, I have listed the bgp output. R6#sh ip bgp Network Next Hop Metric LocPrf Weight Path* 192.168.4.0 10.10...

ramesh.karki · 05-24-2009

Hi All,The scenario is in my network there are three devices connected 1 cisco router and 2 L2 switch.First route 1 connected SW1 and SW1 connected to SW2. The SW2 has mac security enabled, it only allow one mac address with security violation shutdo...

ramesh.karki · 05-23-2009

HI all,Error on initialize VLAN database 1: VTP feature not yet initialized[OK]Anybody know what this error means.Device running WS-C2950G-48-EI in Transparent VTP mode. Help me how can I solve this problem. Thank You,Ramesh

ramesh.karki · 05-20-2009

hi all, one of our customer using 3750G-12S L3 switch for Internet connection, it has two internet connection coming from different service provider (sp1/SP2)and two vlans (22/23) for internal use. what they wants the members of vlan 22 use sp1 and t...

ramesh.karki · 05-13-2009

hello all, how multiple vlans BPDU can carry by the single vlan. does MST tag the BPDU. if there is any clue please,

ramesh.karki · 03-18-2010

Hi Milan,I have applied your config in GNS and verified. It works as expected. router bgp 666 neighbor 10.10.10.1 remote-as 555 neighbor 10.10.10.1 route-map mymap inip community-list 100 permit 444:100!route-map mymap permit 10 match community 100 s...

ramesh.karki · 03-18-2010

Hi, Milan, your are right in this point. Command “no bgp suppress-inactive” does not help my problem. My scenario is (I have attached the network diagram – FYR) : As-444 is peering with as-555 and as-666 and announcing the prefixes to both peers. As...

ramesh.karki · 03-17-2010

hi,After increasing the weight value the route will be active on the routing table and the next-hop will be 10.10.10.1 for that network instead of 10.10.12.1 this will not fulfil my requirement. I just want to forward such inactive route like JunOS d...

ramesh.karki · 05-26-2009

Hi Leo,I will, but does this make permanent solution.Ramesh

ramesh.karki · 05-26-2009

Hi Andrew, First time when I found this problem, it has been up since Sep 9.Exactily sometimes a reboot fixes all the problem and start works like a normal switch. Ramesh

Member Since	‎03-04-2009 06:50 PM
Date Last Visited	‎09-21-2018 11:22 PM
Posts	26

User Statistics

User Activity

bgp advertise inactive route

MAC

Error

PBR

BPDU

Re: bgp advertise inactive route

Re: bgp advertise inactive route

Re: bgp advertise inactive route

Re: Error

Re: Error