About markdemartelaer

markdemartelaer · 02-27-2010

Call forwarding from my DID (Line 1) to my gsm does not work.I configure in "Cfwd No Ans Dest:" my gsmnumber: 003247464xxxx@gw1In de logfiles the right number is called. After 20 secs. But there is immidately: "DLG Terminated"The phone keeps ringing ...

markdemartelaer · 05-18-2009

I have several phones connected to a SPA3102. With one of those phones i have some strange noice when I it pick up . Kind of interruptions of the line.This phone (brand Topic/Audility) works fine directly on the landline. It also works good on ATA's ...

markdemartelaer · 03-03-2010

Hello ,You can find the configuration in the attached file.Regards,Mark

markdemartelaer · 03-01-2010

Hello,here some new tests.My DID-number is now at sipgate.co.uk (0044),GW1 is Rynga.comIs there a better way to send the SPA's configuration then screenshots ?Regards ,Mark

markdemartelaer · 05-21-2009

Hi Patrickthanks for the reply.Mark

markdemartelaer · 05-19-2009

Hello,2-wire cable does not change anything. I did some more investigations:I connected the bad phone on the landline. I takes 17 mA current. My official phone takes 39 mA.Conclusion: the bad phone has too high resistance.Is there a setting on the sp...

markdemartelaer · 05-18-2009

Hello Tomas,I use 4 wire cable. Only 2 wires are used.There is a LED on the phone. It is illuminated bij the line-current. It flashes a bit on the rithm of what I hear.When I mesure the current: it goes up and down from 15 to 20 mA.When I put a seco...

Member Since	‎05-18-2009 10:02 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

SPA3102: call forwarding, Voip-to-Voip

Phone not working on Linksys ATA

Re: SPA3102: call forwarding, Voip-to-Voip

Re: SPA3102: call forwarding, Voip-to-Voip

Re: Phone not working on Linksys ATA

Re: Phone not working on Linksys ATA

Re: Phone not working on Linksys ATA