Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So I have an ASA 5510 8.4 with a WAN IP of 123.123.123.54 and inside network of 192.168.3.0 I have a server at 192.168.3.25 that 123.123.123.54 is NATted to. I need to do one of two things. Either I need to be able to get the ASA to allow ASDM/SS...
So I am trying to get traffic from 192.168.1.33 on UDP ports 10000-20000 and port 5222 (udp) to have DSCP set to EF and Forwarded accordingly. Any thoughts? Building configuration...Current configuration : 32481 bytes!! Last configurati...
ip http serverip http secure-serverno ip nat service sip udp port 5060ip nat inside source list 1 interface FastEthernet0/0/0 overloadip nat inside source list 101 interface FastEthernet0/0/0 overloadip nat inside source list 103 interface FastEthern...
So I am configing a 6509 with sup 720 for simple DSCP. I am sure i am missing something in the config. Posting the config. Any pointer would be greatly appreciated.!! Last configuration change at 17:45:28 UTC Thu Jun 21 2012!ver...
So I decided to Go with a fairly simpler approach ... How does this look?Building configuration...Current configuration : 21817 bytes!! Last configuration change at 15:13:41 UTC Fri Jun 22 2012!version 12.2service timestamps debug uptimeservice tim...
Ok So trusting the Ingress DSCP What about the Egree or does that matter? And Doing this I can effectively get rid of the mls qos vlan-based right?Trusting the ingress dscp where would this command lie? Does it go in the global or under an in...
Well I am trying to setup global QoS for certain DSCP values Basiclly giving precendence to the mapped dscp values before any other traffic. So I need to assign the policy to the vlan interface
