Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi There,
I am having trouble with a couple of stack port being down after I added a 6th switch to a stack of 2960x switches. It is port 1 on switch 1 and port 2 on switch 6.
I provisioned the switch on the stack first and also set the switch numbe...
Having issues with PXE boot not working.
DHCP server and WDS server are on the same subnet 10.18.0.0/16 and the clients are on a separate one.
If I set the subnet of the client to the same as the servers it will PXE boot fine but the issue is seen on...
DHCP Server IP is 10.18.4.113
SCCM Distribution point Server - PXE - 10.18.3.84
The clients are in VLAN 32 and they connect as you describe.
The PXE server is reachable via ping from the client or any other IP in the client subnet for that matter. Th...
Clients are in a different VLAN from the Servers.
Vlan interface of layer 3 switch:
!interface Vlan32 description Floor 3 DATA VLAN ip address 10.20.30.1 255.255.254.0 ip helper-address 10.18.4.113 ip helper-address 10.9.14.113 ip helper-address 10...
Modified option 66 from the server name to server IP and still no different.
It stops at "Awaiting approval" and although it is not a network error as such like i say if i have the client on the same subnet it works fine.
