Hello All, I faced some issues with c9200 series switches where the users remained connected via LAN directly to the switch and all of a sudden the connected port stopped working with no LED status. When I did the admin shut and no shut that particul...
Hello all,I am facing a weird issue, seems when i am trying to reach a machine and pinging it by its hostname, pings works.But when i ping that machine with its IP, my machine says couldn't find host.Is there any suggestions, how to tackle this issue...
Hello, I am trying to configure Port Based ACLs in Switch C2960X having IOS release 15.0(2)EX. But i get error every time while applying ACL on the physical interface "Port Based ACL are not supportive with this image".Can anyone help me how can i re...
Hi,, I was trying to do manual pruning in the Inter-VLAN Routing.
So i wanted only VLAN A and VLAN B communicating with each other and VLAN C not be accessible from VLANs A and B.
But after removing VLAN C from the trunk links of VLAN A and B also re...
Hey,
I have a VLANs architecture where a switch has a separate VLAN with a core switch for inter-vlan routing.
All the switches are connected directly to the core switch and while having information about all the directly connected neighbors through...
Hi, A similar problem just appeared but seems it is on another switch and for the first time.However, here are the outputs of the command as requested:---------------------------------------------------------------------------------------------------...
Hi Miranda, The problem first appeared a couple of days back and to resolve the issue since the users were impacted in the production Env. I tried resetting the ports which worked.I can check for the Mac entry once the problem will appear again. Ho...
