About Rickam

Rickam · 03-01-2022

Hello,I've had this problem for a while now, but have decided to take another look at it. As it is now, I can accept inbound connections to the DMZ from the internet. I am using the dedicated DMZ port on the router, and have configured for the "DMZ...

Rickam · 03-02-2022

I have had a look at these instructions and this seems to be the relevant text: "Step 5. Enter in the DMZ IP Address and Subnet Mask. (Anything that is plugged into the LAN4 segment must be in this network).Note: Make sure that the device connected t...

Rickam · 03-01-2022

Thank you BB for your reply. Sorry I was not clear on this: The LAN is working fine (I can connect the to the internet on LAN). The problem is only with the server in the DMZ not being able to reach the internet. In terms of outbound connections...

Rickam · 02-19-2022

Hi groupetechno, I've been struggling for years to get the DMZ configured properly on my RV320. As it is now, I can use the hardware DMZ port for my server, but can only receive packets from the WAN. I can't initiate connections or ping the outsid...

Rickam · 12-16-2020

Oh my. It's a full 5 years later and Cisco have not replied to your question. It sure would be nice if even their lowest tier support staff would occasionally visit the community and chime in with some answers.My experience with the RV320 DMZ (usin...

Rickam · 06-05-2018

I'm having the exact same problem with the RV320. I'm trying to connect to the office using an Iphone using the inbuilt VPN client. With a PC I can connect to the RV320 using PPTP without issue, but no matter what I try I can't get the iPhone t...

Member Since	‎06-03-2018 12:03 PM
Date Last Visited	‎10-17-2022 02:22 PM
Posts	7

User Statistics

User Activity

RV320 DMZ setup issue. I can accept inbound connections only

Re: RV320 DMZ setup issue. I can accept inbound connections only

Re: RV320 DMZ setup issue. I can accept inbound connections only

Re: Hi,

Re: Can't access the internet from RV320's DMZ

Hello