About don.wood

don.wood · 12-31-2004

Has anyone seen this before?We have a 30 user location that just went live behind a 384Kb/s Frame-Relay circuit. We are running G729 codec between locations and are using G711 locally. The MOH for the new location is being sourced from the local IOS ...

don.wood · 09-11-2005

If you are using IOS based Gateways you should be able to setup some SNMP based log-traps to provide some real time ISDN logging. (assuming that you are using PRI with Caller ID enabled).I haven't seen a way to do this within CM for MGCP gateways (66...

don.wood · 01-02-2005

MOH is being sourced from the local IOS gateway. The MOH file is different music than our central office. When a remote user places me on hold (when dialed in over the PSTN), I hear the "remote" MOH song being played. I can also verify that there is ...

don.wood · 01-01-2005

we are 3.34. Just out of curiosity, why wouldn't the AAR take a MOH (or transcoding or conference) stream into account when calculating available bandwidth. It seems to me that this would be just as damaging as wrongly accounting for a stream that is...

don.wood · 12-15-2004

We have almost the same problems with our VG248's.Software version 1.2(1) DSP firmware version 3.6(20x) Loader version 1.0(1) We get dropped calls, very slow transfer rates. This is a very large analog environment that includes outbound analog, inbou...

don.wood · 12-13-2004

You could always encapsulate in GRE. As long as they aren't blocking that you could get through.

Member Since	‎12-10-2004 08:14 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

MOH from branch router throws off AAR calculations.

Re: How to see Call Detail Record in real-time ?

Re: MOH from branch router throws off AAR calculations.

Re: MOH from branch router throws off AAR calculations.

Re: VG248 modem troubles

Re: Pls help!! I have 12 Cisco ATA-186 at several POPs and now a