Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to set up a simple PIX to PIX VPN using the simple PIX-PIX VPN documentation from the config sample page. I've got lots of VPN tunnels established to other devices from other PIX's quite happily so this is fairly embarrasing. Anyway, the c...
We have identified a security issue with our wireless network that i'm trying to plug. I'm sure that the facility tor implementing this exists but I can find no mention of it within the WAP device documentation, probably because I'm not using the rig...
I'm setting up a VPN tunnel from one site to another over the internet. This normally isn't a problem and it's something I've done a few times before with no issues. However, with this instance, the device (that sits in a dmz) that will be accessed f...
For a number of years we have quite happily maintained a two tier structure consisting of a failover pair of 535's on the inside, a 'no man's land' lan in the middle and a failover pair of 515's on the outside of our WAN infrastrcuture. All that exis...
Hope someone can help me with this, it's got me scratching my head.This problem relates to a pix535 with ten interfaces running 6.3.3.We have voice traffic coming in from a customer on the outside interface. This traffic is then being routed to serve...
Use MRTG to monitor the IPSEC connection bandwidth, you might have to mess about a bit to get it working as required though. See this threadhttp://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Man...
Workstation problemHave you set an access-list up yet?If not you will need to apply an access-list which allows access from the device on the inside of the firewall to the device on the outside. You should also create an access-group to allow yourse...
Excellent! That was exactly what the problem was. There were two statics for 10.1.44.0/24, one for the inside interface and one for the voice interface. Removing the inside interface one solved our problems immediately. Thanks a lot.Interestingly, t...
