Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,
We have cisco 4507 at the distribution layer, where several VLANs are there. For past few days we are observing that users of one vlan VLAN 52 are unable to connect to the network. On investigation, we found out that the users of this VLAN...
Hi,
I would like to configure a Cisco 1924 switch as a manageable switch so that I can access it remotely using telnet, but I am not able to enable the telnet feature on that switch. Can anyone suggest how do I enable the telnet on 1924 switch?
Tha...
Hi,
We have 4507 R+E switch at distribution layer on which two ports are connected to an access switch 1900 series(One port on VLAN 80 & other on VLAN 88). Some users on the 1900 switch belong to VLAN 88 and some to VLAN 80.
We have EIGRP running at...
Hi,
I was studying for my CCNP switch exam. During the topic of Loopguard, I came across "Due to sudden loss of BPDUs, a loop may be introduced in the network".
Now what is the exact technical reason for a switch to not receive the BPDUs from the nei...
Dear Sarathpa,
We have DHCP server connected multiple hops away from this 4507, we have routed port connectivity between this 4507 and Nexus 7K, then from nexus 7K we have nexus 5K, after which our DHCP server is connected. So just tell me how do I ...
It is stuck in choosing the K or M as you can see in the previous post of mine, after I press K for command line, nothing is happening, while earlier it used to take me to the command line interface.
Hi Mark,
I know that how to enable telnet on cisco devices. Its just that in 1900 series as its very old switch, there is no vty option ahead of line keyword.
And now the console of the switch is also not happening. I am now unable to take the conso...
Hi Peter,
1..The VLANs 80 and 88 span across our whole campus in multiple switches.
2.Right now the closet in which the 1900 switch is placed, its key is misplaced somewhere so at the moment we don't have physical access to that switch..
3. May be th...
