Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are going to have dual 9508s and want to set up VPC between the 9508s and 9300 switches. Currently only have one 9508 available but the other is on the way. I configured HSRP on the vlan interfaces on the 9508 and Half of a trunked port-channel ...
Is there any easy way to create an access port for a bare-metal server (linux) on ACI? I need to reconfigure a trunk VPC port, that was connected to a VMware ESXI server, to an access port for a single server. I've found documents that start in t...
Thank you everyone who helped on this. I followed RedNectar's steps to create the static port. I couldn't get the straight up access port working but did create a VPC port, trunked it and then had the SysAd add a vlan tag on server interface.
So now need to figure out what I missed to cause that error. I have checked and double-checked and can't seem to find what I'm missing to cause that invalid path.
Update: Under the EPG history I have a configuration failed due to invalid path configuration. There is no domain, associated with both EPG and Port, that has required vlan. I have verified the physical domain is linked to the EPG.
First of all. Thank you so much for taking the time to help me on this. I very much appreciate it. I created a new Access port policy and followed those steps. Verified the physical domain in the EPG. Recreated the static mapping ( selected unta...
