Hey Mark,
Have you tried adding the allowed statement on you Cisco interface?
"switchport trunk allowed vlan 126,127,200,1000"
Also make sure you do not have LACP running on the HP as it has an auto aggregation feature.
"interface 24 no lacp"
Hey mguzman4158,
With this particular bug, Yes, both those codes are affected but only if you are using the feature GetVPN. If you are not using this then you should be fine. I would recommend doing a code upgrade to 15.4(3)S5.22 in order to mitiga...
Hi Jack,
I'm not clear on your question, but having captures on both interfaces will tell you if it's ASA or not ASA issue. For example if you see packing coming on inbound but not leaving outbound, then it's ASA issue. If packet coming on inbound, ...
The best way to find out if it's ASA issue or not using capture, is to run 2 capture commands. One on the inbound interface and one on the outbound. If traffic is working fine, you should see incoming & outgoing packets on both captures. If you see p...