Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a trunk being present from our NREN, it currently has 2 vlans on it 900 & 2101. We need to be able to encapsulate another group of local vlans and tunnel them through vlan 2101. I would like to do this on a single switch, probably a 6506 wit...
I am using the std 2.6.12_1398 kernel and am finding that I am unable to get reliable connections. After a reboot, the connection to the Cisco 3000 works fine. I have turned up the logging and but there is nothing obvious. After the last line, below...
We have put in a PIX 506E with a small community of internal users isolated behind it. The small community will still use the corporate lan to access the internet so I have the small part on inside and the corporate lan on outside.I have added an 'i...
The biggest hurdle has been crossed.By adding tftp-server massey a.b.c.d xxxxI can now get at any tftp server on the massey side. That achieved I have uploaded various ACLs which seem to have now got most things working the way I want.My conclusion ...
snmp-server has no impact on 130.123.128.1 as it is polling, it isn't being sent traps.But the issue is why does tftp not work but ping does ?I have heard that there are a bunch of implicit rules associated with a sec0 interface and that may been the...
Most of the 130.123 network is on the 'massey' side. Only 130.123.224/24 is on the inside. I don't want to use NAT and have triednat (inside) 1 0.0.0.0 0.0.0.0 0 0but that doesn't seem to make any difference.From 130.123.128.1 I can ping 192.168.101....
