Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Scenario:The LAN interface of the internet router is connected to a layer 2 switch. There are many gateways (Firewalls) are connected to this Switch. We connected the ASA Firewall outside interface to this switch. We do have web servers behind the...
Hi,My customer requires Switches configured with HA. Each Switch should have the following configurations:20 x Gigabit Ethernet ports20 x Fast Ethernet ports5 x GBIC (not SFP) portsWhich CISCO Switch model can be recommended (Should be feasible as we...
Hi,Can I use CISCO 3550 SMI to do VLAN Routing? CISCO has stated that currently SMI supports basic routing, I am not sure whether that means now SMI image switches can be used for VLAN routing. Please someone help me to comfirm on this.Thanks,Modestu...
Hi Guys,Is there any command which I can use on the CISCO ASA in order to force a broadcast (to the router) its outside interface MAC Address with all the NATed (Static) IP addresses?Regards,Modestus
Hi Guys,Thanks for your response.I tried configuring Static NAT on the ASA Firewall, and replace the existing Watchguard Firewall with the ASA, but I found that the Perimeter Router is not redirecting the Web requests to the ASA. I suspect due to the...
Hi Guys,Thanks for your responses.Currently my customer is using a Lucent Switch (Central Switch) with GBIC module and this Switch is connected to other Lucent Edge switches. The linking cable is a multimode Fiber cable with SC connectors on both sid...