Greetings,Have PIX 515E, 6.3(4)Use Cisco VPN Client 4.6.02.0011Use AES-256,Hash Sha, vpngroup XXXXXRecently acquired new, bigger scope of IP's from ISP, as we are adding a DMZ.Changed to new Public IP's on PIX, normal inbound/outbound network traffic...

This morning, I recently received this entry on my syslog daemon from my PIX. Can anyone please shed light as to what this means? Thanks....%PIX-4-500004: Invalid transport field for protocol=6, from 69.226.93.202/0 to (My WAN IP)/445

Greetings, I have a client that uses one of the RFC 1918 Addresses (192.168.x.x) for their internal network and VPN Client Connectivity. I am in the process of creating ACL's to prevent any IP Address under RFC 1918 (10.X.X.X, 127.X.X.X,169.254.X.X...

Greetings,I would like to block any ICMP requests from the outside; returning host unreachable, etc. Would the syntax be something like:icmp deny host 1.2.3.4.5 echo-reply outsideI would also like to permit ICMP from inside to outside.What would the...

Greetings,I have recently configured a PIX515E with site-to-site and remote access(3DES/AES). My S2S and remote access tunnels are up and running fine. The Cisco VPN client my remote users are running is version 4.6.02.0011.Just to get remote VPN ac...