Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings,Have PIX 515E, 6.3(4)Use Cisco VPN Client 4.6.02.0011Use AES-256,Hash Sha, vpngroup XXXXXRecently acquired new, bigger scope of IP's from ISP, as we are adding a DMZ.Changed to new Public IP's on PIX, normal inbound/outbound network traffic...
This morning, I recently received this entry on my syslog daemon from my PIX. Can anyone please shed light as to what this means? Thanks....%PIX-4-500004: Invalid transport field for protocol=6, from 69.226.93.202/0 to (My WAN IP)/445
Greetings, I have a client that uses one of the RFC 1918 Addresses (192.168.x.x) for their internal network and VPN Client Connectivity. I am in the process of creating ACL's to prevent any IP Address under RFC 1918 (10.X.X.X, 127.X.X.X,169.254.X.X...
Greetings,I would like to block any ICMP requests from the outside; returning host unreachable, etc. Would the syntax be something like:icmp deny host 1.2.3.4.5 echo-reply outsideI would also like to permit ICMP from inside to outside.What would the...
Greetings,I have recently configured a PIX515E with site-to-site and remote access(3DES/AES). My S2S and remote access tunnels are up and running fine. The Cisco VPN client my remote users are running is version 4.6.02.0011.Just to get remote VPN ac...
Edward,Thanks for the info, however, I am refering to RTP (Real Time Protocol) - a component of SIP. Below is some background on it; as well as RTCP.I want to make sure that as a port opens on an outbound SIP call, that the port remains open for the...
Duncan,I have an ISP provided Cisco 1760 Router, a SMC 7008ABR Router(for NAT and Firewall; but soon to be removed and replaced with a PIX515E. The 3550 is currently connected to the SMC.)
