Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a problem with our network. We recently changed our old core switches (Cisco 6509) running on CatOs to a Cisco 6506-E running on IOS. Previously netbios name resolution is working across subnets. The hostname for printer located on subne...
Hi,I would like to ask regarding the configuration for the backup rserver with sticky configured. This is not documented in the Cisco guides.Suppose the real server1 fails and connections are diverted to server2. Then server1 resumes service. What h...
Hi Guys,Just want to ask a question: what is the acceptable association or reassociation time for the WGB?Our environment is on a shipyard, and AP's are mounted on a light mast around 30 meters high, and our WGB clients are mounted on the cranes, th...
Hi Alain,We are using DHCP in our network, that is why we need to have an IP helper. I have checked on the clients IP configuration and they are pointing to the WINS server which is also the DHCP server, however they are still not able to resolve th...
Hi Alain,My configuration already have ip-helper configured. Please see below snippet of the configuration:interface Vlan107 ip address 172.88.107.2 255.255.255.0 ip helper-address 172.88.108.16 no ip redirects standby preempt standby 107 ip 172.88....
Hi Yushimaz,Thanks for your insightful and very helpful reply.However I would like to confirm with you on something:So when server1 goes to operational, server2 will still take in connections as long as it have an entry in its sticky table database. ...
Hi Kaye,This issue is only happening to some but not all WGB Clients. We did some site survey just using the netstumbler on the crane level and was able to see some rogue AP's, however their signal strength is not that strong at around -90 to -100 d...
