About Inneedofhelp

Inneedofhelp · 03-28-2012

Hello,I've 3 Cisco 800 series routers and I needed to configure site-to-site vpn tunnel from branch2 to the main office(branch 1 VPN was already configured and working). I've managed to get the tunnel up and everything seemed ok as sh cry isa sa,sh c...

Inneedofhelp · 03-29-2012

Thanks a bunch,As I went to work today, everything was working. I Guess the yesterdays changes started to work after the restart of the tunnel.Thanks !

Inneedofhelp · 03-29-2012

Thanks for the response, I wondered about that myself and went ahead with the changes. Still can't get the ping through.It now looks like: ip access-list extended NATdeny ip 10.9.8.0 0.0.0.255 10.9.9.0 0.0.0.255deny ip 10.9.8.0 0.0.0.255 10.9.6.0...

Inneedofhelp · 03-29-2012

Hi, Thanks for the quick response, I tried to ping from both routers, but no ping went through. Used to command 'ping 10.9.6.1 source 10.9.8.254' and vice-versa.

Inneedofhelp · 03-28-2012

Hello,Thanks for your quick response, I added the main office config and the branch2 config to attachment below. Also, i cannot ping form the branch router internal interface to the main office subnet and that goes both ways.What do you mean by "You...

Member Since	‎03-28-2012 12:17 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Site-to-site VPN tunnel is up, but cannot ping PC-s on either end

Site-to-site VPN tunnel is up, but cannot ping PC-s on either en

Site-to-site VPN tunnel is up, but cannot ping PC-s on either en

Site-to-site VPN tunnel is up, but cannot ping PC-s on either en

Re: Site-to-site VPN tunnel is up, but cannot ping PC-s on eithe