Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a Cisco 819 WAN Router (C819 Secure M2M GW (non-US) 3.7G HSPA+ R7 w/SMS/GPS).Software: Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)For dialing in at my Provider (T-mobile Germany), I u...
Hi Mathias,thank for the script. A colleague in my company developed the following script as a workaround.ip sla 1 icmp-echo xx.xx.xx.xx source-ip yy.yy.yy.yy frequency 120ip sla schedule 1 life forever start-time nowevent manager applet EnableCHATDe...
I upgraded to the newset firmware, but it's still the same.Did you simulate an error with "clear int cellular 0" or did you experience connection problems during normal operation?If this error is only together with "clear int cellular 0" this might b...
Hello Mathias,my solution is to manually reset the modem with the command test cellular 0 modem-resetTo enable such reset-commands, you need to configure "service internal" previosly in your router-configuration.But I am still not sure, whether th...
Thank for your efforts.It is very important for be, because i am going to take the BSCI exam for CCNP.OK. So am I finally right in thinking, that the "Fd is 0" is an IOS Bug? (I have seen it more often than just in this cisco document)So i conclude,...