About brendan.odonnell

brendan.odonnell · 03-28-2012

Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside ...

brendan.odonnell · 03-30-2012

Unfortunatly I can't since the Sprint U1901 is a USB device. I'm using the CradlePoint in pass-through mode to translate the connection to RJ-45.~Brendan

brendan.odonnell · 03-29-2012

I logged a parrellel thread at serverfault and have been making some progress there. Here is the link, http://serverfault.com/questions/374621/initial-cisco-asa-5510-config.Basically my outside IP address and gateway are on different subnets and its ...

brendan.odonnell · 03-29-2012

I was also able to verify (I think...) the proper xlate entries.gateway# sh xlate | i 10.0.1.xTCP PAT from any:10.0.1.x/34187 to outside:x.x.x.x/34187 flags ri idle 0:00:06 timeout 0:00:30TCP PAT from any:10.0.1.x/34186 to outside:x.x.x.x/34186 flags...

brendan.odonnell · 03-29-2012

John,Thanks so much for the quick response.1. I can't ping anything on the outside from any inside hosts. Running a debug icmp trace before shows me this:ICMP echo request from inside:10.0.1.x to outside:4.2.2.1 ID=2618 seq=1 len=56ICMP echo request ...

brendan.odonnell · 03-28-2012

I found something curious, though I'm not sure it helps. When I plug the outside drop directly into my laptop I get the following routes:Destination Gateway Genmask Flags Metric Ref Use Ifacedefault 10.42.45.46 0.0....

Member Since	‎03-28-2012 02:35 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

Initial Cisco ASA 5510 Config

Initial Cisco ASA 5510 Config

Initial Cisco ASA 5510 Config

Initial Cisco ASA 5510 Config

Initial Cisco ASA 5510 Config

Initial Cisco ASA 5510 Config