Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any recommendations for PIX 7.x - HTTP Inspection for the following:Maximum URi LengthMaximum Header Length (and response)Body Length (min/max)RFC Request methods (what to allow/block)Extension Request method. etcThanks
I continulaay get input CRC errors on my 3550 only when I connect to routers (2621). I have changed ports on both the 3550 and 2621 and changed the cable, but still get the CRC errors.Config is belowAny help is appreciated -Jeff3550 config!interface...
I have read and re-read the PIX 515E docs and do not see a way to block port scans or limiting the number of connections per IP. I know other firewalls will permit the limiting of connections from a source IP and will also block the IP's if it detect...
Since CDP is not a big issue, we have not upgraded yet, but will during our next maintenance cycle. As long as we have CDP off, there are no errorsJeff
The issue was resolved by Cisco support yesterday. Turned out to be a CDP problem with the 3550 when connectied to a 26xx router. Per Cisco Support it is bug CSCef71702 and resolved in 12.2(35)SEAThanks to all who provided things to look atJeff
Turns out to be an interoperability issue between the 3550 and 26xx routers. If directly connected, there are CRC errors on data coming from the 2600 to the 3550. If I place a hub between the 3550 and 2600, the errors disappear. Cisco support now ha...
