Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Attached is complete console log from AP. WLC 2504 Software version is 8.5.171.0. I suspect issue is AP unable to get DHCP but there is no apparent reason for it and I see no DHCP logs in the console output. I reset the APs to defaults multiple...
Hi, I have a syslog server with severity level informational. I am looking for config-change details in the logs but I don't see anything other than user login success/failed, so I am guessing this is not possible with syslog. Also, from what I read ...
Hi guys,Have a question regarding spanning tree and way its supposed to work when there is a redundant path in fiber daisy-chained switches. Root switch for all vlans is connected via fiber link to the first of the daisy-chained switches. Below is sa...
Hi,Yes. All APs are in FlexConnect mode and option 43 is configured. I moved the working APs off of vlan1 to vlan20 yesterday successfully. When I originally posted the question all were on vlan1. It needed to be done anyways and also to see if maybe...
Hi,Yes. APs are connected directly to Cisco 2960-X with brand new cat6 cables 5ft long. Problem stays with the problematic APs.If I connect a working AP to same port 25 or 27 it boots up just fine and connects to WLC. Also tried different patch cable...
Thanks for the suggestion. Switch ports for the APs are set on auto full-duplex, showing as connected on 1000M. Unfortunately, I don't have a power injector to try as a workaround. I checked the serial number from one of the APs and it showed as ''n...
Below are outputs of the commands requested. One 3802 AP with the issue is connected to Gi2/0/27, however another one is just fine on Gi2/0/25 joined a week or so ago. RICCSSWI015#show power inlineModule Available Used Remaining(Watts) (Watts) (Watts...
