Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm having issues copying files from ASA flash to TFTP server over Anyconnect VPN. I have a Nexus 9K switch thats connected to the ASA and I have no issues copying files from the flash on the Nexus switch to the TFTP server. Its just that when ...
Hello, I'm having an issue with running HSRP on Cisco Nexus 9K in vPC. I've done the configs but when Initiate the "show hsrp" command on the Nexus 9Ks. its saying "Standby router is unknown" on primary switch and "Active router is unknown" on standb...
Hello, I've noticed that I cant create vlan interfaces on this model but I use to be able to on older model like the ASA5505. Has this been changed ? I'm new to the X series. what's the equivalent of doing this on the 5555-X ?
I'm having an issue reaching the DMZ network from VPN. I need to be able to RDP to the DMZ host 10.20.1.2/24 from the VPN subnet 10.2.2.0/24. I have configured the NAT policy and ACLs but still not able RDP to the DMZ host. Please see the ASA 5505 ru...
Hi everyone, I cant seem to get this to work so here's some information about the network and what I need so hoping someone can guide me into configuring this correctly. I'm running ASA 5505 v9.2 ASDM v7.9inside interface: 10.2.1.1DMZ interface: 10.2...
The original issue has not been resolved. I can ping now but that's not what I needed. I need to be able to transfer files to/from the ASA and that's still not working. Like I mentioned I have Nexus 9K switch connected to the ASA and I don't have any...
Yes now i can ping the tftp server from ASA and in SolarWinds tftp server log I can see the public IP of the ASA making it through but says "dropped because peer didn't respond" and now I can see the file in the tftp root folder but with 0 KB
The management-access is already configured. Can you provide a config example of the no nat and how is that going to help ? as I have 4 sub-interfaces configured for the 4 vlans on the inside network.
What do you mean I don't need to make any changes on the firewall ? what about assigning the inside interface ? security level ? Can you please post the complete configs ? there will be servers that will be assigned static IPs in those subnets. What...
