Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have CM 12.5.1.11900-1468845 phone running 12.7(1)Our receptionist was using an 8945 phone. I upgraded her to an 8845 phone. Now when she parks a call, it goes on hold and immediately start ringing back to her phone. The park reversion and park mon...
We've been receiving a lot of spam calls from 3-digit caller ID numbers. In an effort to cut down these calls, I added the following rule. It seems to have helped, but I'm still seeing occasional calls log with caller ID 009. Should't the following r...
Turned out to be bad documentation.The help tip on the DN config page states that a Park Monitoring Reversion Timer blank value will use the service parameter.The help page on this states that a 0 value or blank value in the parameter will use the se...
Found the reason why the translation-rule 3 wasn't working. Rule number 2 under voice translation-rule 2 replaces the first digit of the incoming number with a + for E164. So the actual inbound caller ID is a 4-digit number (0009). I made it a 4-digi...
Yeah, that doc matches up to what I'm looking at. On the inbound dial-peer, I'm matching my inside numbers with "incoming called-number [2-9].........$", and rejecting calling numbers based on voice-translation rules. In my initial example, I only sh...
