Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have WLC5520HA1. The AP configuration are default. The problem is that some users, see that their Wifi is aconnected but they have no data. I checked, the WLC shows that the user is associated but even I am not able to ping the user from WLC.The us...
i want to do scp from my nx-os switch to my scp server with rsa authentication. The problem is that it still asks for password. The scp server has no permission problem. I did the the steps based on "https://www.cisco.com/c/en/us/td/docs/switches/da...
Hello,
I am studing for the ccnp switching. I have a question regarding the BPDU and native vlan. if we change the native vlan to another vlan, and also the native vlan is tagged. what happens to stp, RSTP bpdus.
example: vlan 1 BPDU where the native...
Yes it received IP address via DHCP and I see the associated IP address in Wlan controller panel. I do the test ping from the Wlan controller panel but I see time out. When the user disconnect the Wifi and connect again he receive the same Ip and has...
thanks for your reply, But i am confused, base on this link: "https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/24330-185.html#cg5" "In PVST+, the 802.1Q IEEE BPDUs are forwarded untagged on the common Spanning Tree VL...
