About malweth

malweth · 11-06-2013

I am using EEM 4.0 on IOS 15.3.3M1 (universal) on a 2951 router.I have snmp-server manager set.I'm trying this two ways, one with just EEM Action statements, the other as an EEM Tcl Policy. Both are registered to "none."EEM code:action 001.0 info typ...

malweth · 11-13-2013

Thank you! That was the exact problem. We don't normally run v2c.Why does the router need to be set up as a server on that community string when it is acting as a client? The end device is a server using that string.Thanks again!!

malweth · 11-12-2013

Joseph,I have enabled the debugs and kept the original debug snmp packets running. The output is attached along with the wireshark output from this particular run.Thank you for the help.

malweth · 11-07-2013

We are testing this with a cisco router (as configured in the original post) on 10.1.1.254 and cisco switch (embedded 3750) on 10.1.1.253.The OID we're using is the ifAlias corresponding to GigabitEthernet0/1 on the switch. The description was set to...

Member Since	‎03-08-2005 11:54 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

Query of SNMP device times out, wireshark shows response

Re: Query of SNMP device times out, wireshark shows response

Re: Query of SNMP device times out, wireshark shows response

Re: Query of SNMP device times out, wireshark shows response