About Lorenzo46

Lorenzo46 · 09-18-2017

Hi,I start to explain my topology: I have 2 WLC 5508 (WLC-A and WLC-B) and 2 AP Type (AP-1242 and AP-1852).Both APs are connected to a Cisco L3 Switch on which I have configured a DHCP Server with option 43 to give the ip address to both APs.The WLCs...

Lorenzo46 · 04-16-2015

Hi,My question is simple:I have an ACS with 3 interfaces: Gi0/0, Gi0/1 and Gi0/2. I've configured the 3 interfaces with 3 different IP Addresses. I've made this because I have 3 networks: Management (10.10.0.0/24), Network 1 (10.10.1.0/24) and Networ...

Lorenzo46 · 10-05-2017

It's happened exatly what you have told. The AP1242 joins WLC-1 immediately without an issue. The1852 attempts to join WLC-1 but is unable to. The same DHCP scope gives the 1852 another option to join another controller so the 1852 joins to WLC-2. T...

Member Since	‎04-16-2015 12:59 AM
Date Last Visited	‎10-10-2019 12:29 AM
Posts	4

User Statistics

User Activity

DHCP Option 43 between two WLCs

ACS 5.5 routing between interface

Re: DHCP Option 43 between two WLCs