About JonRM1970

JonRM1970 · 01-16-2016

I recently changed our Asa device from a pix to a new 5510 with 9.1.2 iOS on it. The device has a Vpn tunnel pinned up to our data center where our production servers are. Prior to changing out the Asa, I was able to map a drive to a shared folder on...

JonRM1970 · 11-24-2015

I have an ASA 5510 running 9.1(2). I am not entirely familiar with the ASA firewall, but know enough to be dangerous with it. What I am looking for is some help on the syntax and proceedure to get a second subnet added into the device and working. W...

JonRM1970 · 06-12-2015

I have an easy question for someone. I am used to the pre-8.3 IOS version of nat'ing and am having some trouble on a newer version nat.What I am wanting to do is port inbound http/https traffic from the outside in and send it to port 5081 on the insi...

JonRM1970 · 06-05-2015

I have an old PIX 506e that I am replacing out with an ASA5510, and I'm having some issues on the conversion statements. I have IP Phones that come in from the outside world and get converted to an inside address and a port number ranging from 10021...

JonRM1970 · 04-17-2015

All I am in a bind. I have an old 5510 that has version 8.0(3) software on it and I'm updating to a new 5515-x. With the amount of work it is doing I am trying to just script the entries in and do it by hand rather than try to migrate it and risk pro...

JonRM1970 · 01-19-2016

This is only happening on the Site-to-Site Tunnel. If I disconnect from the Office ASA and go to the Data Center ASA direct, it will work fine. No filter that I know of. This is a basic setup for a l2l tunnel and VOIP phone access. Nothing else on it...

JonRM1970 · 01-19-2016

Carl, This is a L2L pinned up tunnel. IT runs from our office to the co-lo data center. Settings for the tunnel: (tunnel-group, access-list and NAT) Please advise if all settings are needed. -------------------- OFFICE(config)# sho run tunnel-group...

JonRM1970 · 11-30-2015

Seb, I sent an e-mail back with a problem that I ran into. -Jon

JonRM1970 · 11-25-2015

Seb, if you have an e-mail you would be willing to give me, I can give you a sanitized copy of all three configs. Did not want to post them here due to community boards. -Jon

JonRM1970 · 06-08-2015

Thank you Vibhor.

Member Since	‎04-16-2015 12:09 PM
Date Last Visited	‎08-18-2017 06:46 PM
Posts	15

User Statistics

User Activity

Vpn and Mapped drive not working

ASA port question

Port forwarding

PIX 506 to ASA conversion

Question on Static NAT (one-to-one)

This is only happening on the

Carl,

Seb,

Seb,

Thank you Vibhor.