Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Everytime I enter the following AAA commands my switch locks up.aaa new-modelaaa authentication login default group tacacs+ localaaa authorization consoleaaa authorization config-commandsaaa authorization exec default group tacacs+ local aaa authoriz...
I am using a 3750 switch and going through a Sidewinder G2 firewall. Thefirewall only has its startup config on it with and Internal IP address (.1)which will be the internal gateway. My switch has VLAN2 config of .2. I can ping from my switch to the...
I have Cisco 3745 with the WIC-2T cards I have had this problem where the S/0 seems to not work. I get line up protocol down but everything is working and I can switch the cable to S/1 and it works fine. It seems like we are over driving the clock ra...
I have a WS-C2912MF-Xl switch with two 2601 routers connected connected via FA1/1 and FA1/2. on theswitch FA1/1 and FA1/2 say up and upon the both routers FA0/0 is up and down, is therea switch configuration I need to set up to get the routers to tal...
Looking at the multicasting over GRE and I saw the example http://www.cisco.com/en/us/tech/tk828/technologies_configuration_example09186a00801a5aa2.shtml and I waswondering where do you define the multicast group 239.1.1.20? Is this defined on a core...
I was using the switch to just connect the two routers on the same network so I could play withsome configurations. I thought the switch would bepassive and let the routers talk. I have changed the duplexs and speed and changed the cables and interfa...
thanks for replying, I was going to try the configuration that was suggested, but I don't have a test bed and will be trying it on a live network, is there any pitfalls to that configuration or additionsI should be aware of?