Hi All   I'm trying to automate the enable and disable of a specific WLAN on 5508 Wireless Controller.   Having used Event Manager Applet to shut down / enable an interface previously I thought it would make sense to use it again to do this. The script keeps ending with:   show event manager history events 10 43 Actv abort Tue Nov 6 10:43:00 2018 timer cron applet: Wlan3Shut   Below is the config I used. Can anyone help me out?   event manager applet Wlan3Shut event timer cron name Wlan3Shut cron-entry "43 10 * * *" maxrun 60 action 1.1 cli command "enable" action 1.2 cli command "ssh 10.X.X.X" pattern "User:" action 1.3 cli command "myusername" pattern "Password:" action 1.4 cli command "mypassword" pattern ">" action 1.5 cli command "config" pattern "config>" action 1.6 cli command "wlan disable 3" pattern "config>" action 1.7 cli command "exit" pattern ">" action 1.8 cli command "logout " pattern ">" action 1.9 cli command "n" pattern "(y/N)"         This is the output if I SSH Manually to the 5508 from the switch.   SwitchName#ssh 10.X.X.X (Cisco Controller) User: MYUSER Password:********** (Cisco Controller) >conf (Cisco Controller) config>wlan disable 3 (Cisco Controller) config>exit (Cisco Controller) >logout The system has unsaved changes. Would you like to save them now? (y/N) n [Connection to 10.X.X.X closed by foreign host]     Many Thanks! Rob     ... View more

Hi, I'm trying to shutdown an interface on a 3850,  Ive followed the guides on this link https://learningnetwork.cisco.com/docs/DOC-24145 but they don't appear to be working?   Am I missing something?   I want to shut down  GigabitEthernet2/0/20 at 04:00 and bring it up at 21:50   I set the time on the switch.   This is the first method I tried.   event manager applet shut event timer cron name shut cron-entry "0 4 * * *" action 1 cli command "configure terminal" action 2 cli command "interface GigabitEthernet2/0/20" action 3 cli command "shutdown" event manager applet noshut event timer cron name noshut cron-entry "50 21 * * *" action 1 cli command "configure terminal" action 2 cli command "interface GigabitEthernet2/0/20" action 3 cli command "no shutdown"   This didn't seem to work, so I tried method 2 on the document:   Creating the files on the flash but replacing the line i nterface FastEthernet 0/0 with interface GigabitEthernet2/0/20   Example: configure terminal interface FastEthernet 0/0 shutdown kron policy-list noshut cli tclsh noshut   kron occurrence noshut at 21:50 recurring policy-list noshut ! kron occurrence shut at 4:30 recurring policy-list shut ! kron policy-list noshut cli tclsh noshut ! kron policy-list shut cli tclsh shut   The Schedule is set as follows:   Core3850#sh kron schedule Kron Occurrence Schedule noshut inactive, will run again in 0 days 12:53:54 at 21:50 on shut inactive, will run again in 0 days 19:33:54 at 4 :30 on   This didn't work either can anyone help me debug why?    Many Thanks in advance!   Rob ... View more