Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys, We are migrating from cisco ASA to FTD. in the previous configuration, traffic from inside was authenticated using AAA but did not function well such that we ended with too many AAA exceptions to allow systems on the inside to access anyt...
We are using c9800 in foreign and anchor setup with guest authorised by Cisco ISE.As of yesterday, users have hard time connecting to guest ssid. they receive various errors- impossible to connect to the SSID- [400] BAD REQUEST- even some do not s...
Hello All, I'm trying to configure Guest WLAN with the Cisco ISE HotSpot portal using Auto-Anchor Mobility.is there any guide describing the whole process?starting with this reference (https://community.cisco.com/t5/security-documents/ise-guest-acces...
Hello,we are trying to configure guest WLAN in foreign and anchor topology using two C9800 WLCs.we are receiving the error messages below== ANCHORJul 14 18:38:06.288: %CLIENT_EXCLUSION_SERVER-5-ADD_TO_BLACKLIST_REASON_DYNAMIC: Chassis 1 R0/0: wncmgrd...
Hello All,
We are using a FMC with 2 FTDs.we are trying to configure the FTDs to send SNMP traps to an SNMP Server using the Platform Policy in FMC.It does not look like we are receiving SNMPV3 traps messages on the SNMP server after events like rebo...
Hello Marvin,I intended to give read-only access to the ServiceNow MID Server and to allow inventory discovery and inventory update of the CMDB Database.Can RADIUS still be applicable and relevant?Patrice
Cisco FTD/Security Team,Any plan to enable tacacs+ on FMC/FTD, other competitors support tacacs+. We are pretty surprised & disappointed that until now this feature is still not supported.Patrice
Hello Scott,I was able to verify an set up the mobility tunnel so that the guest client is visible on the Guest Anchor Controller with an IP Address provided by the DHCP server configured on the ANCHOR C9800. I believe the next step is that the guest...
Hello ALL, I really want to know if a guide is available somewhere to help configure a Guest WLAN in Foreign and ANCHR deployment.On the FOREIGN WLCconfigured the Guest WLAN as well as the Guest Wireless profileconfigured Mobility Tunnels with the AN...
