The recover application-partition on an IDSM-2 will not affect the switch software or switch configuration.However, if the IDSM-2 is configured for inline operation, then the traffic currently passing through the IDSM-2 will no longer pass (because t...
Higher level (later) signature updates require the E4 engine update. To get the E4 engine update, you'll need to go to a more recent s/w version. The latest 7.0 version is 7.0(6)E4 and the latest signature update (for E4 engine) is S607.
Here's a link to the IPS v5.0 documentation:http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/index.htmHere's a link to the IPS v5.0 cli configuration guide:http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguid...
Hi Christopher,I believe the IDSM-2 is suffering from a known issue, CSCef12198. Please power down the IDSM-2 and remove it from the chassis. Wait approximately 30 minutes, re-insert the IDSM-2 and power it up to the MP (note you'll need to set the...
No, you can use VACL capture or SPAN. The link provided above is for SPAN.What kind of switch are you using and what type of software (CatOS or IOS) and version is it running? I'll provide the proper links when you mention that info.