About ahmed-naguib

ahmed-naguib · 02-14-2010

I have a problem with the access point WAP 4410n.we implent this access point in a 20 floors tower and roaming applied per floor with the same SSID and WEP key.all the tenants in the tower complaining that they are able to connect to the wireless net...

ahmed-naguib · 04-05-2012

Kiwi syslog server can log different Virtual Displays,use the following,1. Divide your sending devices into groups such has Firewalls, switches, routers, internal, external, sales etc. 2. For each group decide on a Syslog facility to use. Recommend...

ahmed-naguib · 04-05-2012

Hello if you would like to set the speed of the switch port you can use the followingconf tint GigabitEthernet 1/0/1speed (10,100,100 or Auto)you can use the auto to let the switch decide negotiate the speed with the other switch .

ahmed-naguib · 02-15-2010

We have an advice to force the ethernet speed to be 100 m.b and to set the channel selection to be Auto insted of doing it manually.But still have the same senario.

ahmed-naguib · 02-15-2010

Hello,Project description:We have 80 APs to cover 20 floors tower as 4 access points per floor.Configuration sample:Roaming applied in each floor( the same SSID and WEP key per each floor). Each access point use a different channel not to overlap.The...

ahmed-naguib · 02-14-2010

Hello,We are facing the same problem, tried everything, and updated the firware to 2.0.1.0, Still the same.

Member Since	‎02-14-2010 04:39 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

WAP4410N unable to connect to the wirelss network!!!!!!!!

Syslog Server Configuration

bandwidth limit on gig port

Re: WAP4410N unable to connect to the wirelss network!!!!!!!!

Re: WAP4410N unable to connect to the wirelss network!!!!!!!!

Re: WAP4410N stops responding