What happens when you don't have any CSS applied at Line level but CSS applied to Device only or vice-versa? Will you not be able to make or receive any calls if Line or Device is not taking precedence over one or the other? Also, how would this wor...
Thanks Eduardo, there are so many issues with the new Ata190, I hope Cisco is doing something about it. I couldn't register it to CME 10.5 for the reason mentioned in tac response and Cisco's dev team is working on it to get it fixed in the next rele...
Eduardo, did you manage to get this fixed? I am having the same problem. I have seen posts stating that most settings could be tweaked from IVR menu, but I don't see much information on IVR in Cisco's documentation. Appreciate all your response.RgdsF...
Based on the exhibit above, A single call using G729 codec packet = 120Bytes (VPN overhead included)L3 Data transmission rate for G729 call = 50pps (Packets Per second)Bit Rate ...
ATA is pre-configured for hook-flash transfer. while off-hook, press the hook-flash and release it quickly, you should hear a second dial-tone, now dial in the extension you need to transfer to. Conference call work the same !!!Not sure if that make ...