Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After upgrading to DNAC 2.3.7.11, we encountered a similar issue where previously working 'admin' account stopped working and we had to configure another account in ISE (with SUPER-ADMIN rights) to make this integration working again. While doing th...
Hi,
Would appreciate your help to understand if I can perform the AP image predownload on all the connected APs on my 9800 controller (total APs = 370) during AP service Pack installation (APSP).
I am aware and did the predownload on APs while upgrad...
Hi,
Recently we come across an weird issue where Guest user after successful authentication gets kicked off from internet prompting login page and asking for re-login. It happens repeatedly after re-login.
We have Cisco WLC 5520 Foreign-Anchor setup ...
Hi,
This solution works well, thank you.
However, I have observed that users are getting full CLI access to the WLC, whereas the GUI access functions as expected. Do you have any suggestions on how to restrict or manage CLI access with LobbyAdmin U...
Thanks for your responses guys. However I am not talking about Software Update here. The discussion is about APSP (AP service pack installation) which does not need a WLC reboot and APs will be upgraded in staggered manner. Cisco Catalyst 9800 Serie...
You can also try with creating a guest accounts with 121 days validity/Expiry. That was the temporary workaround by TAC.
No disconnections observed when we set the account validity other than default 90 days. I would suggest to try it once.
hi,
After multiple calls with Cisco TAC engineers were not able to find the exact problem from the PCAPs and Debugs. However, we replaced the Foreign WLC from model 5520 (AireOS) to c9800 and issue got resolved. We are still using model 5520 (AireO...
