Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm currently in the process of re-designing QoS for our entire network (LAN & MPLS WAN).We already have VLAN & IP Address QoS enabled in the core of our network.In 2008 we implemented MPLS between HQ and 2 Remote/Branch Offices. Each site has...
Hello,We are currently using the L2TP/IPSEC PIX VPN and want to disable this and switch over to the Microsoft ISA 2004 VPN (L2TP/IPSEC).I believe that I have disabled the PIX VPN from the outside interface and also configured the PIX to forward the a...
Hello Joseph,Here's what our MPLS Provider provides:Queue 1 - Class A = VOIP or Low Latency. First In, First Out. Bandwidth Allocation = 5%, Strictly Policed. 6% bandwidth means the extra 1% would be dropped. Queue 2 - Weighted Fair Queue (CBWFQ) ...
Jon,I feel your sympathy. I have gathered company requirements and we do have to balance the requirements along with QoS for Network Management.I was curious if people include required network services (DNS, DHCP, Active Directory, LDAP, Kerberos) i...
Hello Jon,I've read bits and pieces of the Cisco QoS Enterprise Design Guide along with lots of additional information from Cisco Support, including config guides for our Catalyst 3560 Switches.I wanted to post to the forum because I am running into ...
When I issued a SH VER command on our PIX-515E firewall this is one of the items in the list:Encryption hardware device : VAC+ (Crypto5823 revision 0x1)This line was located below the Hardware, Flash, and BIOS Flash entries.
