Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a VPN client behind a router 851 connect to an ADSL line. The VPN client version 5.0.04.0300 connect to an ASA5520 at the main office. Connection successful, but it take 60 seconds to get an access to the remote network. I swap the router 8...
Hi,I have a ACS server configure with radius and another Windows 2003 server hosting VPN (RAS) PPTP . ACS Group have the microsoft attritubes (encryption require, 128 bits, MPPE-Keys). When I try to connect using the PPTP client on WinXP, I receive t...
I install CiscoWorks 2.5.1, upgrade to 2.6 and upgrade the DFM to 2.0.7. I restore the backup of my old CiscoWorks and DFM 1.2 to the new machine. Everything work except that in DFM-> Device summary, all device are in learning mode. It's been three d...
We have WPA1 clients and web authentication with the WLC4402. I have this trap "WEP Key decrypt error" and after the client cannot log anymore on the wi-fi network. I have to remove the client from the controller so they can log on the wi-fi networkW...
Hello,The VPN connection is between a Windows XP client to an ASA5520. But the XP client is behind a router 851, it connect, but after you have to wait 60 seconds to gain access to the network. I try two others sites with ADSL line, no router 851, an...
I found the answer to my problem. For my AAA client I was configure with Radius (IETF). This type of radius does not send the Microsoft Radius parameter. You have to use Radius of IOS/PIX, Cisco VPN 3000 or Ascend. Now the encryption pass from radius...
After many days with some defect module (DFM especially) of CiscoWorks, I reinstall my CiscoWorks server with the hostname and IP thay I want. Now, everything work wonderfully. The lesson I have learn is : If you install CiscoWorks remote on a new se...
I try to reinitialize the DFM database, as explain. No result, my devices are still in learning mode. If I go to device management-> rediscover/delete, the data collector status of a device stay at 90 %The old name (during installation) and new name ...
I found in a document that the web auth will not work with encryption. I have confirm this with my system engineer at Cisco. Cisco doesn't seem to have a plan to include the encryption and the web auth in a near future, but if everyone ask for it, ma...
