What is the purpose of the additional ethernet inerfaces (in addition to inside,outside) on the 3015 and higher conecentrators. On the VPN 3015 i've seen it referred to as a DMZ port. But most scenarios i have seen have the VPN itself located in the ...
We're lookig to migrate our backbone to 10gig primarily for networked video editing solutions, cost wise link aggregating multiple gigabit interfaces of our server using 3750 1000T ports is more cost effective than 1 single 10gig copper or fibre port...
We're looking to implement a gigabit segment with a 3750 switch, with the latest apple imac G5 clients connected and and an xserve G5 connected doing link aggregation using a 4 port smalltree NIC. Although the Xserve supports jumbo frames i believe t...
We're looking to implement a RAS dialin solution using a 1721 router, my question is....Do we need to secure the connections with a firewall, or is AAA and encryption enough.
Hi AllWe're looking into purchasing an IDS/IPS appliance, but am concerned about thruput and perf issues. We don't have the budget to stretch to the multiGigabit models to monitor multiple points on our gigabit backbone and network in addition to doi...
Thanks for the link it'll help when we come to configure AAA, as regards the firewall issue i've read a variety of approaches to securing remote access, some of these mention firewalling but give no scenarios or examples - others have no firewall(s) ...
Thanks for the info Alex, you've hit the nail right on the head in terms of our stumbling block - cost. I cannot justify two IPS devices, even if they were both 4215's let alone a 4215 and a 4240.Basically you've confirmed what i suspected, that util...