Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 Catalyst 6500s with CSM-S cards installed. The CSMs are in redundant configuration already. The SSL offloading is configured in bridged mode. CSM provides redundancy for the client VLAN. How do we provide redundancy for the SSL cards? Do we...
How can we implement client NAT and source IP sticky for the same server farm without running into issues? Our NAT pool is using IPs from the VIPs' subnet. Is this possible? This configuration is on Cat 6500 w/ CSM-S v. 2.1.1. Thanks.
Hello,We have a Catalyst 6500 w/ CSM-S configuration that has 2 serverfarms with identical real servers using the same VIP. Each farm has 50 real servers (2 IPs with 25 consecutive ports each). One of the serverfarms is defined under a SLB policy wit...
Hi,There is not enough information to determine your physical/logical design.Generally speaking, you can use the "bandwidth xxxxx" and/or "delay xxxxx" statements under the interfaces that connect to the ISPs to select the preferred path. The larger ...
Hi, here is someting that we use on our tunnels for intermittent EIGRP relationship transitions. You can give it a try. It has to be configured on both ends of the connection.interface Tunnel22ip address xxxxxxxxxxxx ip tcp adjust-mss 1370 - set the...
