Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Okay I am new to TKIP. But I have to use it because we have a bunch of Nikon cameras that come with these wireless add-ons that use TKIP.I am having a problem getting it going on my Cisco WAP. I have a WEP key setup, but the Cisco instructions say to...
Okay, I've got a small issue that I think is a NAT problem. Could someone look over this config and tell if I've done something amazingly stupid? I can get to the load balanced addresses of 10.0.4.67:7080 and 10.0.5.98:8080 but NOT 10.0.4.68:8080 (no...
We have a normally operating SecurID server working here and it provides authentication for numerous routers and VPN connections, but for some reason we cannot seem to make PIX authentication work. Looking at the log of the ACE server shows that ASDM...
We managed to get the CSS units up and running and I am just using TCP as my application keepalive type. However, our servers that are behind the CSS boxes are getting this error message every few seconds. Anyone with any insight? Should I change teh...
Greetings, I am very new to the CSS and I'm hoping for a little basic guidance. Here is what I have so far:A pair of 11503's that I hope to setup in failover mode. I have a pair of Gig fiber ports in each unit.The immediate need is to get redundancy ...
I solved my problem. I left out where I was applying the NAT in the group servernat. I applied the NAT to the stbsn01.xxxx.com server (under the group servernat) and that fixed the problem. For anyone who has a similar problem the syntax is:group ser...
I appreciate the advice, but I am not running ACS - I'm running RSA's ACE server. And I've looked through and there are no options available for me to cache the sign on for any length of time. Anyone else have an idea?
I was going through the same thing. We generate roughly 9 million syslog events a day through our PIX boxes and Kiwi wasn't cutting it. Have a look at the software from eiqnetworks. I've evaluated several products and this one looks to be the best fo...
After doing some packet sniffing we discovered that the problem was that the CSS devices were doing what they were supposed to be doing with their TCP keepalives. The server hated that there was just a TCP connection opened every few seconds and no b...
Alright, I'm making progress. I removed all the NAT stuff. Here is my current config. I'm VERY close to getting this working. I can ping the VIP, but the service doesn't work (port 8080).!*************************** GLOBAL ***************************...
