Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've been working with iSCSI/MPIO for 15 years but I'm new to UCS and some of the configurations is foreign to me and I'm failing to fully understand how HA and failover works here.So in more of the traditional setup with rack mounted server I would ...
I have two WLC 2504 and 14 access points, currently best connection I can get is 14 Mbps, shouldn't I get 300 Mbps from these devices? I changed channel width from 20 to 40 under Wireless - 802.11a/n/ac -DCA but this made no difference, am I missing ...
Here is what's happening, we can see some clients connecting as "ac" (if they support ac) others connecting as "an" or "bn" see attached screen i.e. my laptop is Intel Centrino Advanced-N 6235 if I leave all default setting on my wireless I can see m...
I can do this by disabling b/g on my wireless card on the laptop and I get 300 Mbps but I don't want to modify all laptop and limit people to 5GHz in case they go somewhere where there is 2.4GHz WiFi only, is there a way to setup WLC/AP so clients de...
if I disable b/g on my laptop wireless card I do get 300 Mbps but I don't want to modify all laptops in the company or prevent them using 2.4 GHz in places where 5GHz is not available, instead can APs/WLC be configured in such way so 5GHz is default ...
