Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi CSC,I came across a interesting sympton. Please refer to the following topology.host 1 <-> R1 <-> R2 <-> FW<-> host2host 1 is configured to send syslog to host2, however due to firewall ACL is not configured, this has caused a spike to 99% in R1 w...
Hi CSC,I have tried to implement IP SLA to monitor udp-jitter for voice packets, but it was not successful.Configuration on R1R1#show run | sec ip slaip sla 1 udp-jitter x.x.x.8 5000ip sla schedule 1 life forever start-time nowip sla 2 udp-jitter x.x...
Hi CSC,I am attempting to do nat in the following order:1. DestA (Translated DestA1) <-> Real IP (Egress A)2. DestA (Translated DestA2) <-> Real IP (Egress B)3. DestA (Translated to Egress A) (using PAT) -> Real IP (Egress A)Would option 1 and 3 clas...
Hi CSC,I have a question,If ACL does not allow host to communicate, why is not the source IP be the firewall interface that deny the communication? This is detrimental as it does not reflect who is the root cause. Any way to reflect who is denying th...
Hi Soroush,Thanks, managed to find out the issue, i need to change my udp port. Guess that it might be in used. Take a look at voice score, it shows meaningful data now, whereas udp-jitter would not give such information.vg1.sg0#show ip sla statistic...
Hi Soroush,Thanks for the tips, i forget to mention that both routers are in sync with the same time server. I have tweak the frequency to 300 and I have already configured suggested jitter, and it is running fine for the suggested jitter, but not fo...
Hi Patrick0711,Thanks, but the problem I have is that even though I have enabled the ACL to allow comms, the message is RST-ACK to the client. It is the same message as I have deny the comms as well.I have attached a screenshot of the communication f...
Hi Mike,Thanks, it does help to solve part1. Now I am stuck with another issue, the moment the log keyword is entered for 1 ACE, no more syslog is being generated.
