Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I recently changed my home setup (for more ports and scalability) and am trying to implement a Netgear DM111PSPv2 (ADSL2+ modem/router) and my newly purchased Cisco Rv016. When the netgear is in Modem/Router mode and dhcp, NAT, and Firewall...
Is there anyone that has implemented a Cisco VPN concentrator with a Cisco Radius Server that passes VPN login credentials to a Windows Domain Controller for authentication? If so, I need to know if anyone else is having authentication problems with...
iarroyo, Thanks for the reply. Im not using PPPoE. Im using: Enet_Encap, Mux=LLC, DHCP, VPI8/VCI35. Again, I can pull an address to a PC (connected to the ethernet port of the modem) via command prompt issuing ipconfig /release & renew. Browse t...
I agree with Rick. You need to find what IOS release came with your device and either obtain that or a more current image. That should clear your problem. Its obviously not correctly recognizing the current installed hardware in your router. You cant...
This is in reply to the SecureCRT statement about SSH2. I have used it for access into my Cisco DWDM network and it seemed to work fine (**LATE** 3.x version). I upgraded about 8 months ago to 4.0 and still w/out any issues. I am curious as to what k...
Don't forget to factor in your overall traffic load going to and from the main site. This may require more bandwidth than a T1 depending on the actual concurrent load coming into your main router. Remember, your linking them for passing traffic back ...
