Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Video conferencing worked when running through an ASA5520 running 8.3(1). Remote end can hear audio but not see video during video conference now that we have upgraded from the ASA5520 to ASA5545 running 9.2(2)4. Old and new configs match for inspec...
I am attempting to set up a site to site VPN with a Checkpoint firewall without much success. My end is a failover pair of PIX 515e firewalls running 6.3(5). Both have a 3DES license. My understanding of failover is the primary has an outside addr...
Telnet on port 80 to 10.204.118.35 and telnet on port 80 to 10.204.118.45 andboth from my workstation which has address 10.170.16.46.e.g., telnet 10.204.118.35 80Thanks.Don Williams
Thank you for your persistence. I do appreciate it. I removed the crypto map and isakmp statements with clear crypto map and clear isakmp. I then rebuilt the the statements and attempted to debug again. Unfortunately no luck. I'm guessing there ...
Thanks. Yes. All the 10.170 networks are legs of our core router. I have verified the static routes to the 10.200.0.0 and 10.204.0.0, etc. networks. I am telnneting to the "primary" inside address so I assume that I am connected to the device tha...
